A gear puller grips the back edge of a gear, pulley, bearing or flywheel with hooked jaws and pushes against the shaft with a center screw. The main choices are how many jaws it has, how wide it opens, how far the jaws reach and whether the set is sized by spread or by ton capacity.
The six sets below range from four-piece 3 to 8 inch kits to ratcheting 2 and 5 ton pairs and a small two-jaw bearing kit. Sizes, steel types and weights come from each listing page and are the makers’ own claims. We have not used these pullers ourselves. Where a listing leaves out a figure, we say so instead of guessing.
As an Amazon Associate we earn from qualifying purchases. Links below are affiliate links, and they do not change the product information we give.
What to Look For
| Feature | Why it matters |
|---|---|
| Spread | The widest part the jaws can hook sets the size you need |
| Reach | Long jaws get behind parts that sit deep on a shaft |
| Two or three jaws | Two jaws fit narrow gaps; three spread the load more evenly |
| Reversible jaws | Flipping the jaws lets the tool pull from the inside or the outside |
Specs at a Glance
| Puller | Sizes | Jaws | Notes |
|---|---|---|---|
| OMT 3 Jaw Set | 3, 4, 6, 8 in spread | 3, reversible | Drop-forged carbon steel; 10 lb |
| GEARWRENCH 3627 | 2 ton and 5 ton | 2 or 3 | Alloy steel; ratcheting; 5.1 lb |
| ARES 15095 | 2 ton and 5 ton | 2 or 3 | Chrome moly steel; short and long jaws; case |
| VEVOR 4-Piece | 3, 4, 6, 8 in spread | 2 or 3, reversible | 12 locking nuts; 9 lb |
| Reywoo 2-Jaw | Small and large pair | 2, reversible | Chrome vanadium; up to 8.2 in outside spread |
| XIIW Bearing Kit | 2, 3, 4, 6 in | 2 | Chrome vanadium; 3.74 lb |
The 6 Best Gear Pullers
1. OMT 3 4 6 8 in Gear Puller Set, 3 Jaw
Four three-jaw pullers with maximum spreads of 3, 4, 6 and 8 inches and reaches of 4.3, 5, 7.3 and 9.2 inches. The jaws reverse for inside or outside pulls, and the 6 and 8 inch sizes have dual fixing holes for four configurations. The maker lists drop-forged, heat-treated carbon steel and a coated finish. The set weighs 10 pounds.
Suits: a general garage kit. Strengths: four sizes with listed reach figures. Weaknesses: no ton capacity on the page. Skip it if you want a ratcheting design.
View OMT 3″ 4″ 6″ 8″ Gear Puller Set, 3 Jaw Puller with Reversible Jaws on Amazon
2. GEARWRENCH 2 and 5 Ton Ratcheting Puller Set 3627
A pair of ratcheting yokes, one listed by the maker at 2 tons and one at 5 tons, each usable with two or three jaws. The legs index into position and stay put, so you can hang the puller and connect each jaw one at a time. The body is alloy steel and the set weighs 5.1 pounds. The page gives no spread or reach figures, so check the maker’s sheet for the opening.
Suits: pulleys and hubs where the jaws are hard to hold. Strengths: indexing legs and two ton sizes. Weaknesses: opening sizes are not listed. Skip it if you need to compare spreads before buying.
View GEARWRENCH 2 and 5 Ton 2 or 3 Jaw Int/Ext Ratcheting Puller Set 3627 on Amazon
3. ARES 15095 Master Ratcheting Gear Puller Set
Two ratcheting yokes of 2 and 5 ton capacity, each with a push rod screw, plus three short jaws, three long jaws and a storage case. The maker lists chrome moly steel for the yokes and jaws, carbon steel push rods and a black phosphate finish. The yokes convert between two-leg and three-leg use. The set weighs 6.12 pounds.
Suits: mixed jobs from small hubs to larger pulleys. Strengths: short and long jaws in one case. Weaknesses: the page does not give a spread in inches. Skip it if you want a plain four-size kit.
4. VEVOR 4-Piece Gear Puller Set, 3 4 6 8 in
Four pullers with maximum spreads of 3, 4, 6 and 8 inches that switch between two and three jaws. The jaws can be mounted forward or reversed, and double-hole adjustment widens the hook range. The maker adds 12 locking nuts to firm up the jaw connections. The set weighs 9 pounds, and the page lists no ton capacity or steel grade in the details table.
Suits: flywheels, pulleys and bearings of mixed sizes. Strengths: two or three jaws in four sizes. Weaknesses: no capacity figure. Skip it if you need a stated ton capacity.
5. Reywoo 6 in and 10 in 2-Jaw Gear Puller Set
Two two-jaw pullers. The small one lists a 0 to 5.35 inch outside spread and a 1.7 to 5.7 inch inside spread; the large one lists 0 to 8.2 inches outside and 3 to 10.5 inches inside. The jaw arms pivot for inside or outside pulls, the beam has a quick-lock mechanism and the spindle has a hex head. The maker lists heat-treated chrome vanadium steel and the set weighs 8.78 pounds. The 6 and 10 inch names in the title do not match the spread figures, so they likely describe overall size.
Suits: wide gears and larger flywheels. Strengths: big inside and outside spreads. Weaknesses: only two pullers, no three-jaw option. Skip it if you want a three-jaw layout.
6. XIIW 4 Bearing Puller Kit, 2 3 4 6 in
Four small two-jaw pullers named 2, 3, 4 and 6 inch, made, per the maker, of chrome vanadium steel with heat-treated mandrels. The jaws turn both ways to widen the working space, and the screw has a hex head. The listing gives the sizes in a mix of inches and millimeters that does not line up clearly, so confirm the opening before you buy. The kit weighs 3.74 pounds.
Suits: small bearings, rotors and gears. Strengths: the lightest set here and four sizes. Weaknesses: unclear size figures. Skip it if you pull large pulleys.
View 4 Bearing Puller Kit 2” 3” 4” 6” with 2 Jaws Pulley Puller Tool on Amazon
Care and Setup
- Center the screw on the shaft and turn it slowly and evenly.
- Seat the jaw hooks fully behind the part before you apply force.
- Follow the maker’s instructions and listed capacity.
- Wipe the screw threads and add light oil before storing.
Mistakes to Avoid
- Choosing a puller whose reach is shorter than the part sits deep on the shaft.
- Comparing sets by name alone when the spread figures differ.
- Assuming a set has a ton capacity when the page does not list one.
- Pulling with the jaws only partly hooked.
Gear Puller FAQ
What is the difference between a two-jaw and a three-jaw puller?
Two jaws fit narrow gaps and small parts. Three jaws spread the load around the part, which suits round pulleys and hubs with room around them.
Which set lists the widest spread?
The Reywoo large puller lists an outside spread up to 8.2 inches and an inside spread up to 10.5 inches. The OMT and VEVOR sets list 8 inches at the top.
The Short Version
For a four-size three-jaw kit with reach figures, the OMT. For ratcheting yokes with indexing legs, the GEARWRENCH. For short and long jaws in a case, the ARES. For two or three jaws in four sizes, the VEVOR. For wide inside and outside spreads, the Reywoo. For small bearings, the XIIW.