Porcelain is dense, so people who cut it usually look for a wet tile saw, where water at the blade keeps dust down and helps the blade. Saws differ in table size, blade diameter and how they handle the water, so match the saw to the size of tile you plan to cut.
The six saws below range from a compact 4-3/8 inch DEWALT to an 8 inch Hoteche on a stand. Specs come from each listing page and are the makers’ own claims; only some listings mention porcelain by name. We have not used these saws ourselves. Read the manual and use the protective gear it calls for.
As an Amazon Associate we earn from qualifying purchases. Links below are affiliate links, and they do not change the product information we give.
What to Look For
| Feature | Why it matters |
|---|---|
| Blade type | Check that the blade named in the listing suits porcelain |
| Table size | Sets the largest tile you can support |
| Water system | A reservoir or containment design affects clean-up |
| Bevel range | Needed for mitered tile edges |
| Stand | A stand or a benchtop design changes where you can work |
Specs at a Glance
| Saw | Blade and motor | Table and depth | Notes |
|---|---|---|---|
| Skil 3550-02 | 7 in diamond blade; 600 W | Side extension for tiles up to 18 x 18 in | HydroLock water containment; bevels at 0, 22.5, 45 |
| PORTER-CABLE PCE980 | 7 in porcelain tile blade; 1300 W | Stainless steel fixed deck | On-board miter square; roll cage; drain plug |
| DEWALT DWC860W | 4-3/8 in diamond blade; 10.8 A | Up to 1-3/8 in deep, wet or dry | 6.6 lb; 12 ft water line; bevels to 45 degrees |
| Hoteche 7-Inch | 7 in blade; 600 W | 330 x 360 mm table; 33 mm at 90 degrees | Water reservoir; 0 to 45 degree tilt |
| VEVOR TC180 | 7 in 65Mn blade; 3600 RPM | 1.2 in at 90 degrees; 0.8 in at 45 | Detachable reservoir; reset switch; 22.5 lb |
| Hoteche 8-Inch | 8 in blade; 800 W | 785 x 385 mm table; 500 mm max width | Stand included; 30 mm at 90, 25 mm at 45 degrees |
The 6 Best Tile Saws for Porcelain
1. Skil 3550-02 7-Inch Wet Tile Saw
A 600 watt, 3600 RPM benchtop saw with a 7 inch diamond blade in the box. The maker highlights a HydroLock water containment system, a sliding side extension for tiles up to 18 by 18 inches, an aluminum table top, an adjustable rip fence with a miter gauge and bevels at 0, 22.5 and 45 degrees.
Suits: a tidy-water benchtop saw. Strengths: side extension and a miter gauge. Weaknesses: the listing does not name porcelain. Skip it if you cut tiles larger than 18 inches.
View Skil 3550-02 7-Inch Wet Tile Saw on Amazon
2. PORTER-CABLE PCE980 7-Inch Wet Tile Saw
A 1300 watt, 2850 RPM saw packaged with a 7 inch porcelain tile blade, a blade wrench and a miter square. The maker lists a stainless steel fixed deck, splash guard, roll cage for carrying and a drain plug to empty water over a bucket.
Suits: a porcelain-labelled blade in the box. Strengths: a stainless deck and a drain plug. Weaknesses: it is a heavy 32 pound unit. Skip it if you need something light to carry.
View PORTER-CABLE PCE980 7-Inch Wet Tile Saw on Amazon
3. DEWALT DWC860W 4-3/8-Inch Wet Tile Saw
A compact 4-3/8 inch masonry saw with a 10.8 amp, 1300 watt motor, a 4-3/8 inch diamond blade and a 12 foot water line that feeds the blade. The maker says it cuts porcelain, granite and other stone to 1-3/8 inches deep, wet or dry, bevels to 45 degrees and weighs 6.6 pounds. The listing shows conflicting speed and battery fields, so confirm details with the maker.
Suits: small cuts and tight spots. Strengths: light weight and a porcelain mention. Weaknesses: the listing does not describe a table and it has data conflicts. Skip it if you want a table saw layout.
View DEWALT DWC860W 4-3/8-Inch Wet Tile Saw on Amazon
4. Hoteche 7-Inch Wet Tile Saw
A 600 watt tabletop saw with a 7 inch blade, a 2950 RPM no-load speed and a water reservoir. The maker lists a 330 by 360 mm table, a 0 to 45 degree tilt and cutting depths of 33 mm at 90 degrees and 21 mm at 45 degrees. The listing does not name porcelain.
Suits: small ceramic and tile projects. Strengths: a built-in reservoir and a tilting table. Weaknesses: a small table. Skip it if you cut large tiles.
View Hoteche 7-Inch Wet Tile Saw on Amazon
5. VEVOR TC180 7 Inch Wet Tile Saw
A 22.5 pound saw with a 7 inch 65Mn steel blade at 3600 RPM and a detachable water reservoir. The maker lists maximum depths of 1.2 inches at 90 degrees and 0.8 inch at 45 degrees, a galvanized worktable and a reset switch. It names ceramic, floor tile and marble, not porcelain.
Suits: occasional tile jobs. Strengths: a detachable reservoir and a reset switch. Weaknesses: only the saw is listed in the box. Skip it if you need a named porcelain blade.
View VEVOR TC180 7-Inch Wet Tile Saw on Amazon
6. Hoteche 8-Inch Wet Tile Saw With Stand
An 800 watt saw on its own stand with an 8 inch blade, 3550 RPM no-load speed and a 785 by 385 mm table. The maker lists a 500 mm maximum cutting width, cutting depth of 30 mm at 90 degrees and 25 mm at 45 degrees and a weight of 60 pounds.
Suits: larger tiles in a fixed workspace. Strengths: a stand and a wide table. Weaknesses: heavy at 60 pounds. Skip it if you need to move it between jobs.
View Hoteche 8-Inch Wet Tile Saw with Stand on Amazon
Setup Notes
- Read the manual first, including the steps for filling the water.
- Fill the reservoir to the level the maker states.
- Match the blade to the tile material named in the listing.
- Place the saw on a level surface.
- Empty and wipe down the tray after use.
Mistakes to Avoid
- Assuming every blade in the box is meant for porcelain.
- Choosing a small table for large-format tile.
- Ignoring conflicting figures on a listing.
- Skipping the cleaning step so slurry dries in the tray.
Tile Saw FAQ
Do all these saws mention porcelain?
No. The PORTER-CABLE ships with a porcelain tile blade and the DEWALT maker names porcelain; the others describe ceramic, tile or stone.
What is the difference between a hand-held and a table saw?
The DEWALT is a compact hand-held style unit. The others use a table that you push the tile along.
The Short Version
For water containment, the Skil. For a porcelain blade in the box, the PORTER-CABLE. For a compact hand-held saw, the DEWALT. For a small table, the Hoteche 7-Inch. For a detachable reservoir, the VEVOR. For a stand and a wide table, the Hoteche 8-Inch.
