Skip to content
RESEARCH-BASED GUIDES. PRACTICAL EVERYDAY ADVICE.How we pick products
UMTUMT Smart ToolBetter informed. Better equipped.
Bathroom

6 Best Corner Tubs (2026)

Compare the best corner tubs of 2026: two-person whirlpool and soaking picks from Empava, Carver, Kingston Brass and Kohler, plus sizing and install advice.

We may earn a commission from qualifying purchases. How we pick products

Where to buy

Check the latest price, availability and delivery on Amazon. Orders are placed on Amazon. We may earn a commission from qualifying purchases.

  • Empava 59-Inch Corner Whirlpool Tub (EMPV-JT319) Search Amazon
  • Empava PRO Series 59-Inch Corner Whirlpool Tub (PRO03) Search Amazon
See 4 more Amazon options
  • Carver SKC5555 55-Inch Corner Soaking Tub — Best Corner Soaking Tub View on Amazon
  • Atlantis Whirlpools Sublime 6060SWL 60 x 60 Corner Whirlpool Tub Search Amazon
  • Kingston Brass Aqua Eden VTAP6030R22TS 60 Inch 2-Wall Corner Alcove Tub Right Drain Search Amazon
  • Kohler Tercet K-1160 60 x 60 Corner Whirlpool Bath Search Amazon
Read the full guide ↓

Disclosure: As an Amazon Associate, UMT Smart Tool earns from qualifying purchases. This guide is built from product listings and maker specifications, not from our own hands-on testing. Prices are approximate and can change, so check the current price before you buy. Last updated: November 10, 2026.

“Best corner tubs” splits into two very different purchases. True corner tubs are triangular or fan-shaped, sit diagonally across a corner, and are usually built for two people — most add whirlpool jets, heaters and lighting. The other format is a rectangular tub built for a two-wall corner alcove, which drops into the footprint of a standard 60-inch tub. This guide is organized by use case: heated two-person whirlpools first, then jet-free soakers and the premium dealer option, so you can start with the corner you actually have.

In this guide

Quick Picks

The short version: six corner tubs we would look at first, one per use case.

Pick Type Best for
Empava 59-Inch Corner Whirlpool (EMPV-JT319) Two-person corner whirlpool Heated two-person spa soaking
Empava PRO Series 59-Inch Corner (PRO03) Thermostatic corner whirlpool Deep-tissue massage with 20 jets
Carver SKC5555 55-Inch Corner Soaker Triangle corner soaking tub Jet-free soaking, smaller footprint
Atlantis Whirlpools Sublime 6060SWL Corner whirlpool Made in USA, molded-in seat
Kingston Brass Aqua Eden VTAP6030R22TS 2-wall corner alcove soaker Standard 60-inch corner layouts
Kohler Tercet K-1160 Corner whirlpool, drop-in Premium brand, flexible pump placement

Our Picks

1. Empava 59-Inch Corner Whirlpool Tub (EMPV-JT319) — Best Overall

The JT319 is the most complete corner package here. It is a 59 x 59 x 28-inch two-person whirlpool with 10 water jets driven by a 1.0 HP UL-certified motor, seating angled at a 125-degree recline with two pillows. An inline heater holds the water between 96.8 and 104 degrees Fahrenheit once you have filled it hot, and chromatherapy LED lighting, a waterfall faucet and a pull-out hand shower are all built in. The shell is 100 percent acrylic reinforced with fiberglass resin over a 304 stainless steel frame, and the manual lists a 91-gallon capacity.

The costs are installation-side. The manual requires two separate 15-amp dedicated GFCI circuits at 110 volts, and at 150 pounds dry — plus roughly 760 pounds of water — the floor and the route into the bathroom need checking first. The heater maintains temperature rather than heating cold water, so your water heater still does the heavy lifting. For a couple who wants the full spa feature set in a standard 59-inch corner, this is the safest bet here.

Check on Amazon

2. Empava PRO Series 59-Inch Corner Whirlpool Tub (PRO03) — Best for Deep-Tissue Massage

The PRO03 is Empava’s step-up corner model, and the difference is jet count and control. It packs 20 adjustable jets into a 59.1 x 59.1 x 24.8-inch shell, aimed at deep-tissue hydromassage, with thermostatic control and a built-in 1500W heater instead of the simpler hold-temperature setup on the JT319. Capacity rises to 124 gallons with a 15.76-inch soaking depth — the deepest and roomiest well in this guide — and construction is high-gloss acrylic over a stainless steel frame, ETL certified.

That capacity cuts both ways. A 124-gallon fill will drain many standard water heaters, and like its sibling it needs two dedicated 15-amp circuits. It also sits in the premium tier of this list, well above the soakers. Buyers who mainly want a long, quiet soak are paying for jets they will rarely run. Buyers who actually use a whirlpool several times a week, and want the strongest massage Empava sells in a corner format, get the most complete version of it here.

Check on Amazon

3. Carver SKC5555 55-Inch Corner Soaking Tub — Best Corner Soaking Tub

Carver’s SKC5555 is the jet-free option: a 55 x 55 x 18.5-inch triangle — Carver calls the shape a heart tub — built for two bathers with no pump, no jets and no electrical work at all. This listing is the soaker configuration (the part number reads “SKC5555 Soaker”), in acrylic with the glossy, easy-clean surface corner tubs need, since a diagonal front panel is a lot of visible bathroom. At 55 inches on each wall it is also the only true corner tub here that fits corners too small for the 59- and 60-inch models.

Simplicity is the trade. The 18.5-inch height makes for a shallower soak than the big whirlpools, and there is no heater, so long soaks cool at the normal rate. Carver builds the same shell in jetted configurations, so confirm you are ordering the soaker before checkout if a pump-free install is the point. For a small primary bathroom that wants a real two-person corner soak without new circuits, this is the practical pick.

Carver Tubs
Carver Tubs

Check on Amazon

4. Atlantis Whirlpools Sublime 60 x 60 Corner Whirlpool (6060SWL) — Best Made in USA

Atlantis builds the Sublime line in the USA, and the 6060SWL is its corner whirlpool: a 60 x 60 triangular interior with a molded-in seat, 8 directional and adjustable water jets, and a center drain with the pump placed on the left side. The shell is solid one-piece acrylic with a non-porous, high-gloss surface, and the tub is pre-leveled, which removes one of the fiddliest steps of a corner install. The molded seat makes this the most upright, get-in-and-sit-down design here rather than a full recline.

The Sublime name covers soaker, air and whirlpool versions of the same shell, so check the configuration on the listing carefully — the search link below carries the full 6060SWL whirlpool model number. You also give up the heater and chromatherapy packages the Empava models bundle in. What you get instead is US manufacture, a simpler and more serviceable jet layout, and a mid-range tier price for a two-person corner whirlpool.

Check on Amazon

5. Kingston Brass Aqua Eden 60-Inch 2-Wall Corner Alcove Tub, Right Drain (VTAP6030R22TS) — Best for a Standard 60-Inch Corner

Not every “corner” bathroom can take a triangle. Kingston Brass’s VTAP6030R22TS is a rectangular 60 x 30 x 21-7/8-inch acrylic tub built for a two-wall corner alcove, with a tiling flange and apron, so it installs much like the standard alcove tub it usually replaces — it just turns the corner layout to its advantage. Capacity is 44.4 gallons with a soaking depth of 10-15/16 inches to the overflow, and this version carries a right-hand drain. It is a soaker: no jets, no pump, no new wiring.

Set expectations accordingly. The 30-inch width gives a narrower, more conventional soak than the wide triangular wells above, and the depth is modest next to the Carver. Faucet, drain and overflow hardware are planned separately, as with most alcove tubs. But for a remodel working inside an existing 60-inch footprint at the budget-friendlier end of this list, it is the only pick that asks almost nothing of the room.

Check on Amazon

6. Kohler Tercet 60-Inch Corner Whirlpool (K-1160) — Best Premium Brand

The Tercet is the traditional plumber’s corner whirlpool: a 60 x 60 x 21-inch acrylic drop-in with 6 individually adjustable ProFlex hydromassage jets, a 1-1/4 hp pump on an air switch, and molded lumbar supports and armrests worked into the shell. Kohler’s distinctive option is pump placement — the custom-pump version (K-1160-CD in the spec sheet) ships with the pump positioned to suit the installation, which matters in corners where the standard pump location would land against a wall or an access problem.

Kohler sells this line through dealers and showrooms rather than a standard Amazon listing, so the button below runs a model-exact search — confirm the K-1160 model code and the options on the listing before buying. Six jets is restrained next to the Empava counts, and the tier is premium. What the money buys is Kohler’s parts network, dealer support and a conservative, serviceable design that plumbers have installed for years.

Check on Amazon

Best Picks by Category

  • Two-person corner whirlpool: Empava EMPV-JT319 — 10 jets, inline heater and chromatherapy in a 59-inch corner.
  • Deep-tissue massage: Empava PRO Series PRO03 — 20 adjustable jets, thermostatic control, 124-gallon well.
  • Corner soaking tub: Carver SKC5555 — jet-free triangle soaker that fits a 55-inch corner.
  • Made in USA: Atlantis Whirlpools Sublime 6060SWL — molded-in seat, center drain, pre-leveled base.
  • Standard 60-inch corner layout: Kingston Brass VTAP6030R22TS — rectangular two-wall corner alcove, right drain.
  • Premium brand: Kohler Tercet K-1160 — ProFlex jets and flexible custom pump placement via dealers.

That spread is the real decision: the same corner can hold a silent soaker, a heated two-person whirlpool or a familiar rectangular tub, and each choice spends the renovation budget very differently.

How to Choose

Corner format: true corner vs two-wall corner alcove

Start with the shape, because it decides everything else. True corner tubs (triangle, fan or neo-angle) sit diagonally, need roughly 55 to 60 inches of clear wall on both sides of the corner, and give the wide, two-person wells this category is known for. Two-wall corner alcove tubs are rectangular and install like a normal alcove tub against two walls. If your bathroom was framed for a standard 60-inch tub, the second format is a drop-in project; the first is a remodel.

Footprint, capacity and your water heater

Corner tubs hold far more water than their footprint suggests: the picks here run from 44 gallons for the rectangular Kingston Brass to 124 gallons for the Empava PRO03. Check your water heater honestly — a 50-gallon tank heater cannot fill a 91-gallon tub at bathing temperature once cold mixing is counted. Also weigh the filled tub: water alone in a 60-inch corner whirlpool can exceed 750 pounds, plus two bathers, so older floors may need reinforcement.

Soaking, whirlpool and air systems

A soaker has no moving parts, no electrical work and nothing to clean beyond the surface — the Carver and Kingston Brass picks. Whirlpools push water through a pump and jets for a stronger, directional massage, and add pump noise, plumbing and a jet-cleaning routine. Some corner tubs add air jets or combo systems for a gentler, all-over bubbling. Buy jets only if you will use them weekly; an unused whirlpool system is maintenance without payoff.

Drain position and pump access

Corner tubs use center, end or corner drains, and the drain has to land near your existing rough-in or the floor gets opened. On jetted models, note where the pump sits and whether the design leaves an access panel — a pump sealed behind tile is an expensive repair. Models with flexible or custom pump placement, like the Kohler Tercet, exist precisely because corner geometry fights standard pump locations.

Electrical requirements for jetted models

Every whirlpool here needs GFCI protection, and the two Empava models each require two separate dedicated 15-amp circuits — one for the pump, one for the heater. That is usually new wiring back to the panel, not a tap into the bathroom outlet circuit. Soakers need nothing. Get an electrician’s quote before ordering a jetted corner tub, not after it arrives.

Materials, cleaning and warranty

Nearly every corner tub is acrylic, usually reinforced with fiberglass; it is warm to the touch, repairable and light enough for upper floors, but it scratches if cleaned with abrasives. Jetted models need a periodic flush with a jet cleaner to clear biofilm from the lines. Compare warranties on the system, not just the shell: the Empava models carry 3-year cover, while dealer brands lean on their service networks.

Getting the Tub Through the Door: Delivery and Access

A corner tub is a large, awkward object, and many remodeling surprises happen before installation even starts. Measure every opening the tub has to pass through: the front door, hallways, stair turns and the bathroom doorway. Acrylic and fiberglass tubs are lighter and sometimes tilt through tight spots, while cast iron and heavy stone-resin models can be difficult to move and may require extra hands or equipment.

Ask for the shipping dimensions, not only the finished size. Packaging adds inches, and a 60 by 60 corner tub can arrive on a pallet that does not fit a narrow stairwell. If the delivery is curbside only, you will need a plan to move it indoors. Some contractors will uncrate the tub outside to reduce bulk.

Plan the storage period too. Tubs should stay protected from scratches and impacts until the room is ready. Keep the protective film on, avoid dragging the tub, and unpack it only when you are ready to inspect it. Check for chips, cracks and surface damage before signing for the delivery, since damage reported later is harder to resolve.

Floor Support, Framing and Subfloor Checks

A filled tub is heavy, and a corner tub holds a lot of water. Add the weight of the tub itself, the water and the bather, and the load can be substantial. Before you commit, check that the floor structure can handle it. Older houses, upper floors and floors with past water damage deserve special attention.

The area under the tub should be level, solid and dry. Joists, subfloor and any sistering should be inspected, and a contractor or structural professional can assess whether reinforcement is needed. Some tubs call for a mortar bed or a specific support base, and skipping that step can lead to flexing, cracking or noise.

Corner tubs also change how the framing around them looks. The two-wall corner alcove styles in this guide, like the Kingston Brass model, sit against two walls, while a true corner design may use a platform or deck. Each approach changes what support and finishing work you need, so read the manufacturer’s installation instructions before planning the room. If the instructions are not clear online, contact the maker before you purchase.

  • Verify the joist spacing and subfloor condition.
  • Confirm the floor is level where the tub will sit.
  • Check whether the tub needs a mortar bed or support base.
  • Read the installation manual before ordering.

Faucets, Decks and Plumbing Layout

Corner tubs do not always arrive with a faucet, and the faucet mounting options depend on the tub. Some have pre-drilled holes on the rim or deck, some require a wall-mounted faucet and some are designed for a freestanding or floor-mounted fixture. Confirm the faucet type, hole spacing and valve requirements before you buy, because mismatched fixtures are a common and expensive mistake.

Plan the plumbing around the drain position and the supply lines. A tub’s drain location determines where the waste line must run, and moving it later can mean opening the floor. In a remodel, compare the new tub’s drain position to the existing plumbing before you order. If your supply lines or access panel are on a different side, you may need extra plumbing work.

Whirlpool tubs add pump access and electrical connections, which affect where a panel or access door must go. Even soaking tubs benefit from a way to reach the drain and overflow without tearing out tile. Talk with your plumber early, and ask what permits or inspections your area requires.

Budget, Installation Cost and Who to Hire

The sticker price is only part of the cost. Installation can include demolition, plumbing changes, electrical work for a jetted model, tile or surround work, a faucet and finishing. In many remodels, labor and materials around the tub cost as much as the tub itself, so build a budget that includes them.

Moderately priced tubs can be a good fit if the layout is simple and you are replacing an existing tub of similar size. Premium brands, such as the Kohler Tercet, often bring established warranties and wider dealer support, but they also tend to cost more to buy and install. If a tub is made in the United States, like the Atlantis model mentioned in this guide, check delivery times and warranty terms, since those can differ between makers.

Hire licensed professionals where your area requires them, particularly for plumbing and electrical work. Get written estimates from more than one contractor, and ask whether they have installed the specific type of tub you chose. A good installer will catch problems with the floor, drain or access before they become expensive.

Finally, confirm the warranty terms and what they cover, including the shell, the finish and any pump or electrical parts. Keep your receipt and installation records, since claims are easier to settle when the paperwork shows the tub was installed to the maker’s instructions.

Frequently Asked Questions

What exactly is a corner tub?

A corner tub is any bathtub designed to install into a room corner. Most are triangular or fan-shaped two-person tubs that sit diagonally across the corner, but the term also covers rectangular tubs built for two-wall corner alcoves. The diagonal designs trade a bigger footprint for a much wider bathing well than a standard rectangular tub offers.

Will a 60 x 60 corner tub fit in a standard bathroom?

It needs 60 inches of unobstructed wall running out from the corner on both sides, plus room to get the tub through the doorways — a 60-inch square carton is wide. Many standard bathrooms qualify on wall space but fail on the route in. Measure both. If the corner is tighter, a 55-inch soaker like the Carver SKC5555 is the fallback.

Do corner whirlpool tubs need a dedicated electrical circuit?

Yes. Whirlpool pumps must be GFCI-protected, and models with inline heaters typically need a second dedicated circuit for the heater — both Empava picks here specify two separate 15-amp dedicated GFCI circuits. Budget for an electrician as part of the install, and confirm local code before the tub is set.

Can two adults actually fit in a 59-inch corner tub?

That is what the shape is for. A 59 x 59 corner tub seats two across the diagonal with a bathing well far wider than a 59-inch rectangular tub, and the Empava models are shaped with a 125-degree recline and twin pillows for exactly that. Taller bathers should check the soaking depth and interior length figures rather than the exterior diagonal.

Can I replace a regular alcove tub with a corner tub?

With a true triangular corner tub, expect a remodel: new framing or a deck, moved drain, and possibly new circuits. A two-wall corner alcove tub like the Kingston Brass VTAP6030R22TS is the exception — it is built to occupy a standard 60-inch alcove-style footprint, so the swap is closer to a like-for-like replacement.

How do you clean a jetted corner tub?

Wipe the acrylic with a soft cloth and a non-abrasive cleaner after use. Every month or so, fill the tub above the jets with warm water and a purpose-made jet cleaner (or a cup of white vinegar), run the system for 10 to 15 minutes, drain, then refill and run again to rinse. Never use bath oils in a whirlpool unless the maker allows it — they coat the lines.

How much space do I need around a corner tub?

Allow room not just for the tub but for access to the drain, plumbing and any pump or panel. You also need clearance for getting in and out and for the door to swing. Check the manufacturer’s installation guide for minimum clearances before you plan the layout.

Will my floor support a filled corner tub?

It depends on the floor structure, the tub’s weight and the amount of water it holds. Older houses and upper floors deserve special checking. Have a contractor or structural professional inspect joists and subfloor, and follow the manufacturer’s instructions for support or a mortar bed.

Does a corner tub come with a faucet?

Often it does not. Check whether the tub has pre-drilled holes, needs a wall-mounted faucet or is designed for a freestanding fixture, then buy a matching faucet and valve. Mismatched fixtures are a common mistake, so confirm hole spacing and type before ordering.

How much does it cost to install a corner tub?

Costs vary widely by location and project. Besides the tub, you may pay for demolition, plumbing, electrical work for a jetted model, tile or surround work and finishing. Get written estimates from more than one licensed professional and include all of these items in your budget.

Bottom Line

For most buyers, the Empava EMPV-JT319 is the corner tub to beat: a genuine two-person whirlpool with heater and chromatherapy at a mid-range tier. Step up to the PRO03 if massage strength is the priority, choose the Carver SKC5555 for a quiet jet-free soak in a smaller corner, and look at the Kingston Brass if your room only accepts a rectangular 60-inch install. Whichever shape you pick, confirm the footprint, the drain position and — for jetted models — the circuit plan before you order.