Skip to content
RESEARCH-BASED GUIDES. PRACTICAL EVERYDAY ADVICE.How we pick products
UMTUMT Smart ToolBetter informed. Better equipped.
Hand Tools

6 Best Knife Sharpeners for Serrated Blades

Six well-known sharpeners that can handle serrated blades, from tapered ceramic rods to compact pocket tools and rod systems, with trade-offs for each.

We may earn a commission from qualifying purchases. How we pick products

Where to buy

Check the latest price, availability and delivery on Amazon. Orders are placed on Amazon. We may earn a commission from qualifying purchases.

See 4 more Amazon options
Read the full guide ↓

Serrated bread knives, steak knives and pocket knives stay sharp longer than plain edges, but when they finally dull, a flat stone cannot reach the scallops. You need a tapered rod or a shaped abrasive that fits each gullet.

The six tools below all include a way to work serrations, whether through a tapered ceramic rod, triangular rods or a combination tool with a flat side for the plain section of the blade. Most are small enough to keep in a drawer or a pack. We have not used these products ourselves, so confirm the details on the current listing before you buy.

As an Amazon Associate we earn from qualifying purchases. Links below are affiliate links, and they do not change the product information we give.

What to Look For

Feature Why it matters
Tapered rod A cone-shaped rod lets you reach different scallop sizes
Abrasive Ceramic is gentle and fine; diamond cuts faster on hard steel
Combination design A flat side lets you sharpen plain-edge blades too
Size Pocket tools travel well; rod systems sit on a bench
In this guide

Specs at a Glance

Sharpener Type Serration tool Notes
Spyderco Tri-Angle Sharpmaker Benchtop rod system Triangular ceramic rods Corners suit serrations
Smith’s Pocket Pal Multifunction Sharpener Pocket tool Ceramic rod plus carbide Rod for serrations
Lansky BladeMedic Pocket tool Carbide, ceramic and rod Tapered rod included
Work Sharp Pocket Knife Sharpener Pocket tool Diamond plate and ceramic Ceramic rod for serrations
Work Sharp Guided Field Sharpener Field tool Guided diamond plates Includes a serration rod
AccuSharp Knife and Tool Sharpener Hand-held pull-through Tungsten carbide Handles serrated edges

The 6 Best Knife Sharpeners for Serrated Blades

Top pickBest for owners of both plain and serrated knives

1. Spyderco Tri-Angle Sharpmaker

A benchtop system whose triangular ceramic rods have corners that can be used to work serrations, and flat faces for plain edges. Preset slots hold the rods at a fixed angle, which makes the learning curve gentle.

Suits: owners of both plain and serrated knives. Strengths: versatile rods and preset angles. Weaknesses: not pocket-sized. Skip it if you want a single tool for the field.

View Spyderco Sharpmaker on Amazon

Best for campers and anglers

2. Smith’s Pocket Pal Multifunction Sharpener

A small pocket sharpener from Smith’s that combines a carbide slot, a ceramic stone and a tapered rod for serrations in one body. It is a long-standing, budget-friendly tool that fits in a pocket or tackle box.

Suits: campers and anglers. Strengths: compact size and multiple surfaces. Weaknesses: small surfaces mean slow work on big knives. Skip it if you sharpen large kitchen knives.

Smith's PP1 Pocket Pal Knife Sharpener Preset Carbide & Ceramic Stone Sharpeners Fold-O...
Smith's PP1 Pocket Pal Knife Sharpener Preset Carbide & Ceramic Stone Sharpeners Fold-O...

View Smith’s Pocket Pal on Amazon

Best for quick touch-ups on a trip

3. Lansky BladeMedic

A pocket-sized multi-tool from Lansky built around carbide and ceramic surfaces plus a tapered rod for serrations. It is designed for quick fixes in the field rather than a full re-grind.

Suits: quick touch-ups on a trip. Strengths: small footprint and several functions. Weaknesses: limited control over the angle. Skip it if your edges are badly damaged.

Lanksy Blademedic 4-in-1 Knife Sharpener
Lanksy Blademedic 4-in-1 Knife Sharpener

View Lansky BladeMedic on Amazon

Best for backpackers and everyday carry users

4. Work Sharp Pocket Knife Sharpener

A compact sharpener from Work Sharp with a diamond plate, a ceramic section and a rod that is meant for serrated edges. It folds down small and is built for trail use.

Suits: backpackers and everyday carry users. Strengths: a mix of abrasives in a small body. Weaknesses: less comfortable on thick blades. Skip it if you want a benchtop setup.

Work Sharp Portable Pocket and Hunting Knife Sharpener
Work Sharp Portable Pocket and Hunting Knife Sharpener

View Work Sharp Pocket Sharpener on Amazon

Best for hunters and campers with mixed knives

5. Work Sharp Guided Field Sharpener

A guided field sharpener that holds the angle for you and includes a rod for serrations. It also folds up for transport, so it works at camp or on a workbench.

Suits: hunters and campers with mixed knives. Strengths: angle guidance and a rod for scallops. Weaknesses: bulkier than a pocket tool. Skip it if you only own one small knife.

Work Sharp Guided Field Sharpener
Work Sharp Guided Field Sharpener

View Work Sharp Guided Field Sharpener on Amazon

Best for kitchen use and general home tools

6. AccuSharp Knife and Tool Sharpener

A hand-held pull-through sharpener with a sealed carbide blade and a guard for your fingers. The maker describes it as suitable for serrated edges too, which makes it a simple option for a kitchen drawer.

Suits: kitchen use and general home tools. Strengths: easy use and a finger guard. Weaknesses: aggressive carbide removes metal quickly. Skip it if you own thin or delicate blades.

View AccuSharp Sharpener on Amazon

Care and Setup

  • Brush metal dust out of rods and slots after use.
  • Wipe the blade before touching food.
  • Store pocket tools dry to avoid rust on steel parts.
  • Replace a worn abrasive when it stops cutting.

Mistakes to Avoid

  • Sharpening both sides of a serration instead of the beveled side only.
  • Using a flat stone on scalloped edges.
  • Pressing hard with a carbide tool.
  • Skipping the inspection for chips before you start.

Anatomy of a Serrated Edge

To sharpen a serrated knife well, it helps to see what you are actually working on. The edge is not one long bevel but a row of small curved cuts, and each one needs separate attention.

A serrated edge has points, which are the raised tips that do most of the cutting, and gullets, which are the curved scallops between them. Each scallop has a beveled face on one side, ground at an angle, and a flat face on the other, which is often left untouched. When the knife is new, the points bite into a crust or a tough skin, and the gullets channel debris away. When it dulls, the points round off, the scallops lose their edge and the knife starts to tear or slip.

Different knives have different scallop designs. A bread knife typically has large, widely spaced scallops that suit crusty loaves, while a steak knife may have a finer pattern. Pocket knives and outdoor knives vary widely, from small, closely spaced teeth to deep, wavy forms. Some blades have two or three different scallop sizes along the edge, so one rod diameter may not fit them all.

Before you start, hold the blade in good light and look closely:

  • Find the beveled side of the scallops, which is usually on one face of the blade.
  • Check whether the scallops are all the same size or vary.
  • Look for damaged or missing points, which may need special attention.
  • Note whether the knife is fully serrated or has a plain section.

Identifying the bevel side is the key step. Sharpening the wrong side just wears away the flat face and can blunt the points. If you cannot tell, tilt the blade in the light and feel with a fingertip, gently, for the bevel.

Matching Rod Size to Scallop Size

The single most important rule for serrated sharpening is that the tool must fit the scallop. A rod that is too thick sits on the points instead of entering the gullets, while one that is too thin may wobble or rattle and miss the curve.

Tapered rods solve part of the problem because they have a range of diameters. You slide the rod into a scallop until it contacts the beveled edge, then work it with short strokes. Where the scallops are small, use the thin end. Where they are large, use the thicker part. If your knife has mixed scallop sizes, you will need to change position on the rod as you move along. Triangular rods let you use the corner as a narrow tool, which can reach small gullets, and you can switch to a flatter face for larger ones.

When selecting a tool, read the listing for the rod diameters or taper range, and compare them to the scallops on your knives. A bread knife with large scallops needs a bigger rod than a pocket knife with fine teeth. Some sets include several rods of different sizes, which is handy if you have a range of knives.

  • Measure or estimate the scallop width on your knives, and compare it with the rod range.
  • Choose a rod material that suits the steel: ceramic for gentle refinement, diamond for fast cutting on hard steel.
  • Check that the rod surface is clean and sharp, without clogging.
  • Consider a small set of rods if you own both large and small serrated knives.

If a rod does not seem to fit anywhere on your knife, it is not the right tool. Do not force it into a scallop, since that can damage the points or the rod.

Working One Scallop at a Time

Serrated sharpening is slow and methodical, but it is not hard once you know the rhythm. The process is repetitive, so settle into a comfortable position and take your time.

Place the knife on a stable surface or hold it firmly, with the beveled side facing you. Position the rod in the first scallop so that it matches the angle of the bevel. Use short, light strokes, pushing the rod away from the cutting edge, along the bevel, for a few passes. Count your strokes and use the same number in each scallop, so they stay even. Then move to the next scallop, and continue along the blade. If you see or feel a burr developing on the flat side, you are making progress.

Work gently. The bevel in a scallop is small, so heavy pressure removes more metal than you intend and may deform the points. Use a lighter touch with coarse or diamond rods than with fine ceramic ones. Check your work after a few scallops by testing the edge on paper or a piece of bread. If it catches and cuts cleanly, you are on the right track.

  • Keep the rod at the same angle in each scallop.
  • Use light pressure and consistent strokes.
  • Mark the edge with a permanent marker to see where the rod is touching.
  • Take breaks to avoid fatigue, which causes wandering strokes.
  • Clean the rod when metal particles accumulate.

Do not worry if the first attempt is not perfect. A serrated knife is forgiving, because even a partially sharpened scallop adds cutting ability. Practice on an older knife if you are nervous about the first try.

Removing the Burr and Finishing the Edge

After you have worked the scallops, a small burr usually forms on the flat side of the blade. Dealing with it correctly gives you a clean edge that cuts well.

A burr is a thin ridge of metal pushed up by sharpening. It feels rough when you run a fingertip carefully across the flat side, away from the edge. It needs to be removed, or it will fold over and make the knife feel dull after a few uses. The usual method is to lay the flat side of the blade against a fine, flat abrasive, such as a fine ceramic stone or a flat surface of a rod system, and make one or two very light strokes to lift the burr off. Keep the blade flat to the surface, and do not tilt it. Never apply the bevel angle to the flat side, as that would undo your work.

After removing the burr, wipe the blade clean and test it. Cut a piece of bread, a tomato or a sheet of paper to see how it bites. If the knife still struggles, check for skipped scallops, points that are still rounded or areas where the bevel was missed.

  • Brush away metal dust before using the knife on food.
  • Do not run your finger along the edge to test it; use paper or a soft food instead.
  • Repeat a pass on any scallop that feels dull.
  • Wash and dry the knife before returning it to the drawer or block.

Be gentle with fully serrated knives going forward. Cutting on glass, stone or ceramic plates dulls them quickly, and a cutting board of wood or plastic prolongs the life of the edge.

Partly Serrated Blades and When to Replace

Many pocket and outdoor knives combine a plain edge with a serrated section, and they require a mixed approach. At some point, you may also decide a knife is not worth sharpening any further.

For a combination edge, treat the two sections separately. Sharpen the plain part with a flat stone, guided system or flat side of a rod, at the angle recommended for the blade. Then switch to a tapered rod or shaped tool for the serrated part, and work each scallop in turn. Take care at the transition between the two zones, where the stone and rod may overlap. A tool that has a flat face and a tapered rod, like several of the picks above, is made for this job.

Serrated knives can last a long time, but there are limits. If the scallops are worn to the point where the points are gone, if the blade has cracked or the tip has broken off, or if repeated sharpening has altered the profile so that the scallops are shallow, it may be time for a new knife. Inexpensive serrated knives, such as basic steak knives, are sometimes cheaper to replace than to repair, while a good bread knife is often worth keeping sharp. Consider the sentimental or practical value of the knife before you decide.

  • Sharpen the plain section first, then the serrated section.
  • Avoid mixing up the angles of the two zones.
  • Check your sharpener’s listing for support of both edge types.
  • Replace knives with cracks, missing teeth or damaged handles.

If you are unsure whether a blade can be saved, ask a professional sharpener, who can often tell at a glance whether it is worth the effort.

Which serrated knife sharpener should you buy?

The best sharpener for serrated blades is the one whose rod fits your scallops and whose size suits where you will use it. Here is how the six picks match common needs.

  • You have plain and serrated knives at home: the Spyderco Tri-Angle Sharpmaker uses triangular ceramic rods, with corners for serrations and flat faces for plain edges. It sits on a bench and is not pocket-sized.
  • You want a small, budget-friendly tool for camping or fishing: the Smith’s Pocket Pal combines a carbide slot, a ceramic stone and a tapered rod. Its small surfaces make work on big knives slow.
  • You want quick field touch-ups: the Lansky BladeMedic is a pocket multi-tool with a tapered rod, built for quick fixes rather than a full re-grind.
  • You carry a knife every day or hike: the Work Sharp Pocket Knife Sharpener folds down small and has a diamond plate, a ceramic section and a serration rod.
  • You want help holding the angle: the Work Sharp Guided Field Sharpener guides the angle and includes a serration rod, though it is bulkier.
  • You want a simple tool for the kitchen drawer: the AccuSharp is a pull-through with a finger guard. Its carbide removes metal quickly, so skip it for thin or delicate blades.

For a large bread knife, check that the rod is thick enough for the scallops. For fine pocket knife teeth, a thinner tapered end is more useful.

What to check before you buy, and who should skip it

Serrated sharpening has more ways to go wrong than plain-edge sharpening, so check these points on the listing first.

  • The rod diameter or taper range, compared with the scallops on your knives.
  • Whether the rod is ceramic or diamond, and how that suits your steel.
  • Whether the tool also covers plain edges, if you own both kinds.
  • Its size and weight, if you will carry it.
  • What is included, and the warranty or return terms shown.
  • Whether the maker says it works on serrations, not just a general claim of sharpening.

Be realistic about the downsides. Serrated sharpening is slow, because you work one scallop at a time. Pocket tools are small, so they take longer on large blades. Carbide removes metal fast and can be harsh on thin edges. No single rod fits every scallop size.

Who should skip it? If your serrated knives are inexpensive steak knives with worn teeth, replacing them may be more practical. If a blade is cracked or the tip is broken, a sharpener will not help.

Think about where the sharpening will happen. A bench system is comfortable for long, careful sessions at home, while a pocket tool is better when the knife needs a quick fix on a trail or at a campsite.

It also helps to look at your knives under good light before buying. Count how many different scallop sizes you see, because that tells you whether one tapered rod will do or whether a set makes more sense.

Compare the picks above, check the current listing for rod size and what is included, then choose the one that fits how you will use it.

Serrated Blade Sharpener FAQ

Which side of a serrated edge do I sharpen?

Usually the beveled side, working each scallop in turn. Check the maker’s guide for your knife.

Can I sharpen serrated knives at home?

Yes, with a tapered rod or a shaped tool. A flat stone and a pull-through machine often cannot reach the gullets.

How long does a serrated edge last?

Longer than a plain edge in many cases, because the points do most of the cutting.

What are the gullets on a serrated blade?

They are the curved scallops between the raised points. The points do most of the cutting, and the beveled face of each scallop is what you sharpen.

How do I choose the right rod size?

The rod should fit inside the scallop and touch the bevel. Use the thin end of a tapered rod for small scallops and the thicker part for large ones.

Do I sharpen both sides of a serrated knife?

Usually you sharpen only the beveled side of each scallop, then remove the burr from the flat side with a light, flat pass. Check the maker's guidance for your knife.

How can I tell which side is the bevel?

Tilt the blade in good light to see the angled face of the scallops, and gently feel it with a fingertip. The flat face is the side that is not ground.

Can I use a diamond rod on a serrated knife?

Yes, if it fits the scallops. Diamond cuts fast on hard steel, so use a light touch and fewer strokes than you would with ceramic.

What surface should I cut on to protect a serrated edge?

Use a wooden or plastic cutting board. Glass, stone and ceramic surfaces dull edges quickly.

When is a serrated knife not worth sharpening?

If the teeth are worn away, the blade is cracked or the tip is broken, replacement may be more practical, especially for inexpensive knives.

Can you sharpen a serrated knife with a regular sharpener?

Usually not well. A flat stone or a pull-through for plain edges often cannot reach the gullets, so you need a tapered rod or a shaped tool that fits the scallops.

What is the best tool for sharpening a serrated bread knife?

A tapered ceramic or diamond rod that fits the large scallops is a common choice. Check the rod diameter against your knife before you buy.

How often do serrated knives need sharpening?

Less often than plain edges in many cases, since the points do most of the cutting. Sharpen when the knife starts to tear or slip instead of cutting cleanly.

Is a ceramic or diamond rod better for serrations?

Ceramic is gentle and fine, which suits light touch-ups. Diamond cuts faster on hard steel, so use fewer strokes and lighter pressure.

Can I sharpen a partly serrated pocket knife with one tool?

Yes, if the tool has a flat surface for the plain section and a rod for the serrated section. Work each zone separately and take care at the transition.

How do I test whether a serrated edge is sharp?

Cut a piece of paper, bread or a tomato and see whether it bites cleanly. Avoid running your finger along the edge to test it.

The Short Version

For a bench system, the Spyderco Sharpmaker. For a small pocket tool, the Smith’s Pocket Pal. For field repairs, the Lansky BladeMedic. For trail use, the Work Sharp Pocket Sharpener. For guided angles, the Work Sharp Guided Field Sharpener. For a kitchen drawer, the AccuSharp.