A palette knife for oil painting is a thin, springy steel blade used to mix pigment on the palette, scrape back a passage and lay on thick, buttery strokes. Oil stays wet for days, so the blade needs to clean easily with solvent and a rag.
The six knives below range from traditional straight palette knives to bent-neck painting knives from well-known art brands. We have not used these products ourselves, so confirm blade shape, length and handle finish on the current listing before buying.
As an Amazon Associate we earn from qualifying purchases. Links below are affiliate links, and they do not change the product information we give.
What to Look For
| Feature | Why it matters |
|---|---|
| Steel | Flexible, rust-resistant steel springs back and cleans easily |
| Neck | A bent neck keeps your knuckles out of wet paint |
| Blade shape | Trowel, pear and diamond shapes make different marks |
| Handle | A varnished wood handle should resist solvents |
In this guide
Specs at a Glance
| Knife | Material | Style | Notes |
|---|---|---|---|
| RGM Palette Knife | Stainless steel | Painting and mixing | Several shapes offered |
| Jack Richeson Palette Knife | Steel | Traditional | Wood handle |
| Holbein Palette Knife | Steel | Japanese-made | Fine finish |
| Daler-Rowney Georgian Palette Knife | Steel | Traditional | Check shapes on the listing |
| Winsor and Newton Palette Knife | Steel | Studio use | Respected brand |
| Loew-Cornell Palette Knife | Stainless steel | General art | Budget-friendly choice |
The 6 Best Palette Knives for Oil Painting
Top pickBest for impasto painters
1. RGM Palette Knife
A palette and painting knife line with many shapes, often chosen by artists who want to experiment with impasto and sharp edges. Stainless steel blades are flexible enough to spread paint smoothly.
Suits: impasto painters. Strengths: a wide shape choice. Weaknesses: shape names can be confusing. Skip it if you only want a simple mixing blade.
Best for studio mixing
2. Jack Richeson Palette Knife
A traditional palette knife from an American art supply brand, with a steel blade and wooden handle. It is a dependable pick for mixing large quantities of color and scraping the palette between sessions.
Suits: studio mixing. Strengths: a classic, familiar build. Weaknesses: wood handles dislike long solvent soaks. Skip it if you want a modern look.
View Jack Richeson Palette Knife on Amazon
Best for careful, detailed work
3. Holbein Palette Knife
A palette knife from a Japanese art brand known for careful finishing. The blade is meant for smooth mixing, and it offers a fine, balanced feel for painters who work with a light touch.
Suits: careful, detailed work. Strengths: a refined finish. Weaknesses: limited shape choices on some listings. Skip it if you want heavy scraping.
View Holbein Palette Knife on Amazon
Best for traditional oil painters
4. Daler-Rowney Georgian Palette Knife
A palette knife from a long-established British art supplier, made for oil and acrylic painters alike. Traditional blades and handles make it a good all-purpose choice for mixing and application.
Suits: traditional oil painters. Strengths: a trusted maker. Weaknesses: models vary. Skip it if you want a specific shape without checking.
View Daler-Rowney Georgian Palette Knife on Amazon
Best for serious studio painters
5. Winsor and Newton Palette Knife
A palette knife from one of the best-known oil paint brands. It is built for studio use, with a blade that moves thick pigment and a handle that sits comfortably in the hand.
Suits: serious studio painters. Strengths: a respected name in oils. Weaknesses: fewer budget options. Skip it if you only paint occasionally.
View Winsor and Newton Palette Knife on Amazon
Best for beginners
6. Loew-Cornell Palette Knife
A budget-friendly stainless steel palette knife from a craft and art brand. It suits beginners who need a simple blade for mixing oil colors and cleaning the palette.
Suits: beginners. Strengths: an easy entry point. Weaknesses: basic finish. Skip it if you want professional-grade flexibility.
View Loew-Cornell Palette Knife on Amazon
Care and Setup
- Wipe the blade with a rag right after each session.
- Use odorless mineral spirits only as needed, then wash with soap.
- Dry the blade fully to prevent rust.
- Keep wooden handles out of long solvent soaks.
- Store knives flat so the blade does not bend.
Mistakes to Avoid
- Leaving wet oil on the blade overnight.
- Using the tip as a pry tool.
- Picking a very stiff blade for smooth blending.
- Soaking the handle in solvent.
Mixing Knives and Painting Knives in Oil Practice
Oil painters often use two different kinds of knife, and understanding the split helps you buy sensibly. A mixing knife, usually called a palette knife, has a straight, flat blade attached to a straight handle. It is made to blend pigment with medium on the palette, scoop paint and scrape the palette clean at the end of a session. A painting knife has a cranked neck and a handle that sits above the blade, so your hand stays clear of wet paint while the blade meets the canvas.
You can paint with a mixing knife and mix with a painting knife, but each is more comfortable at its own job. When you scoop and fold paint on the palette, a long straight blade reaches into piles of color without your knuckles getting in the way. When you press paint onto a canvas, a cranked neck lets the flat of the blade lie parallel to the surface.
A sensible starting kit is one larger mixing knife and one or two painting knives of different sizes. Oil paint stays wet for days, so mixing generous amounts is common. A blade that is too small makes the job tedious, and one that is too large makes small marks hard. Think about the scale of your canvases and the size of the paint piles you create, then choose blades that match your habit.
Impasto, Scraping Back and Working Thick
Oil paint is well suited to knife work because it is buttery, slow drying and holds a shape. Impasto is the method of laying paint on thickly so that ridges and marks stay visible after drying. A knife is the natural tool for it, as it can lay down a slab of color with a clean edge.
Several moves are worth practicing:
- Dragging the flat: pulls a smooth, thick stroke with a crisp edge on one side.
- Pressing and lifting: leaves a textured peak, good for clouds, foliage and rocks.
- Edge strokes: make thin lines, such as branches, rigging or architectural edges.
- Scraping back: removes wet paint to reveal the layer beneath or to correct an area, leaving a soft ghost of the previous color.
- Sgraffito: scratching lines with the tip into wet paint to show underlying color.
Heavy impasto takes a long time to dry through, and drying time depends on the pigments, the thickness and the room. Follow the usual guidance of working fat over lean, meaning later layers have more oil than earlier ones, to reduce the risk of cracking. A knife-work painting also uses a lot of paint, so budget for it. If you work thinly with glazes and fine detail, brushes will be your main tool and a knife is mostly for mixing.
Steel Quality, Springiness and Shape of the Blade
A good oil knife blade is thin and springs back after bending. That springiness lets you control pressure: a light touch spreads a thin film, and more pressure creates a thick slab. A blade that is too stiff will feel clumsy and scrape the surface, while one that is too floppy will not move stiff paint.
Stainless steel is common because it resists rust, and it takes solvents and soap without staining. Check how the blade is attached to the handle. A neck that is firmly fixed with a ferrule feels solid, while a loose joint will wobble and collect paint. A smooth, polished blade cleans more easily than one with scratches or rough areas, where pigment can lodge.
Blade shape affects the marks. Trowel shapes are all-rounders. Pear shapes suit blending and curves. Diamond or long, pointed blades make precise lines and sharp edges. Round-tipped blades are gentler on delicate work. Because brands use different names for similar shapes, look at the pictures and dimensions on the listing rather than trusting only the name.
If you paint small, pick a compact blade, and if you paint large, choose a larger one. If your listing offers several sizes, consider how the blade fits your hand, as an oversized blade can feel unwieldy. Because palette knives are rounded and flexible, sharpness is not a concern, but smoothness and straightness are.
Handles, Solvents and a Clean-Up Routine
Handles are usually wood, often with a varnish or lacquer finish. A sealed handle resists oil and solvents, but long exposure can soften or strip the finish, so avoid leaving knives soaking. Look at the shape, too: a rounded, smooth handle is comfortable for long sessions, while a flat, square handle may tire your hand. Make sure the handle length lets you hold the knife with a relaxed grip.
Cleaning is straightforward if you do it promptly. Wipe the blade with a rag or paper towel after each color change to keep mixes clean. At the end of a session, scrape the blade against the palette edge, wipe it, and then use a small amount of solvent or oil to remove stubborn paint, followed by soap and water. Use solvents carefully, in a ventilated space, and follow the guidance on the product label. Many painters prefer odorless mineral spirits or a plant-based oil for cleaning.
Dispose of rags properly. Rags soaked with drying oils can heat up as the oil cures and, in some conditions, pose a fire risk. Store used rags in a closed metal container or lay them flat to dry outdoors, following local guidance.
After cleaning, dry the blade thoroughly. A film of moisture left in the joint can cause rust spots. Wipe it down and store it flat or in a roll so the blade stays straight.
Building a Set Gradually and Replacing Worn Knives
You do not need a large set on day one. A practical order is: first, one trowel-shaped painting knife; second, a long straight mixing blade; third, a smaller or pointed knife for details. Add a rounded pear shape if you like blending. Watch which knife you keep reaching for, then buy more like it.
Think about budget in tiers. Lower-priced knives are fine for learning and for the messy job of mixing. Mid-range knives tend to have better steel, springier blades and better handles. Higher-priced knives are chosen by working painters for finish and consistent feel. A good mixing knife is often a better first upgrade than a fancy painting knife, since you use it all the time.
Signs it is time to replace a knife:
- the blade has a permanent kink or bend;
- the blade is rusted or pitted and drags paint;
- the handle is loose, cracked or sticky;
- the tip has snapped off or bent;
- dried oil has built up around the joint and cannot be removed.
Before purchasing, check the listing for blade length, shape name, handle material and whether the knife is sold singly or in a set. Questions to ask: what size canvas do I paint, do I want to apply thick paint or mainly mix, and is the handle comfortable? Keep your knives clean and straight, and they will last for years.
Palette Knife for Oil Painting FAQ
Can I paint with a palette knife only?
Yes. Many artists build entire paintings with knives, using the flat for broad passages and the edge for lines.
What shape should I start with?
A trowel or pear shape is a good all-rounder for mixing and applying paint.
Are mixing knives and painting knives different?
Mixing knives are straight, while painting knives have a cranked neck. Most oil painters end up using both.
Does the blade need sharpening?
No. Palette knives are rounded and flexible, so cleaning matters more than sharpness.
Do oil painters need both mixing and painting knives?
Not always, but many find both useful. A straight blade is convenient for mixing and a cranked blade is comfortable for applying paint.
How do I clean oil paint off a palette knife?
Wipe off as much paint as you can with a rag, then use a little solvent or oil on a cloth, and finish with soap and water. Follow label advice on ventilation and disposal.
Can I use the same knife for oils and acrylics?
You can if you clean it well, though many painters keep separate knives to avoid cross-contamination of media.
What is the safe way to dispose of oily rags?
Rags with drying oils can heat as they cure. Spread them flat to dry outdoors or place them in a closed metal container, following local guidance.
How long does a thick knife painting take to dry?
It depends on the pigments, the thickness and the room conditions, and thick layers can take a long time to dry through. Allow ample time before varnishing or moving the work.
Why does my knife leave streaks in the paint?
Possible causes are a dirty blade, too little paint on the knife, a stiff blade or pressing too hard. Wipe the blade and try a lighter touch with a fuller load of paint.
Is a larger knife easier for beginners?
A medium size is easier to control. Very large knives cover area quickly but can feel awkward, while tiny ones make broad passages slow.
Surfaces and Grounds That Suit Knife Painting
A palette knife puts more pressure on the painting surface than a brush does, so the support matters. Thin stretched canvas can flex under a firm stroke, which makes thick paint crack more easily as it dries and can leave you fighting a bouncing surface. Rigid supports such as primed hardboard panels, wood panels or canvas mounted on board give you a solid base and let you press and scrape without worry. Heavy cotton or linen canvas on deep stretcher bars is a fair middle ground.
The ground, meaning the primed layer, shapes how paint behaves under the blade. A smooth, tightly primed surface lets a knife glide and produces clean, flat planes of color. A toothier surface grabs the paint and creates broken, textured edges when you drag a stroke across it. Neither is better. They simply offer different marks, so match the ground to the look you want.
- Choose a smoother ground for crisp, sharp-edged shapes and layered color blocks.
- Choose a coarser ground for scumbled, dragged strokes and a rustic quality.
- Avoid very absorbent, unprimed surfaces, which pull oil out of the paint and leave a dull, flat finish.
Prepare a few small practice boards before committing to a large canvas. Knife strokes are quick and hard to correct once thick paint has set up, so testing pressure and angle on cheap panels pays off.
Color Mixing With a Knife
A knife is better at mixing than most brushes. It folds pigment into pigment without trapping paint in bristles, which means colors stay cleaner. Pile the paint on a glass or sealed-wood palette, cut through it and press it flat, then gather it and repeat. Stop mixing as soon as the color looks even. Overworking oil paint dulls it and can push a bright mixture toward gray.
Some painters deliberately under-mix. If you lay down a stroke from a pile that is only partly blended, streaks of the original colors remain inside the mark and give it life. This is one of the quiet advantages of knife work, since the variation looks natural and would take extra effort to build with a brush.
Keep a few habits in mind when mixing on the palette:
- Wipe the blade between colors so a trace of dark paint does not muddy a light mixture.
- Mix larger batches than you think you need for a big passage, since matching a color a second time is surprisingly hard.
- Scrape stray paint to the edge of the palette and keep it clean, so you can see true color before you commit.
- Add medium sparingly. A little makes paint glide, but too much weakens the film and thins the texture you may want.
A larger, straighter blade works well for batches, while a small painting knife is useful for picking up a precise amount and delivering it to the canvas.
Thin Work, Scumbling and Lifting Paint
Knife painting is not only heavy texture. A clean, flexible blade can also lay down thin, nearly translucent films. Hold the blade at a low angle and drag it across a dry area so only a veil of color catches on the tooth of the surface. This is a scumble, and it softens a color beneath it without covering it. The result is quite different from the buttery ridges of impasto and gives you a way to balance thick and thin areas in one picture.
You can also subtract paint. Pressing a clean blade lightly onto wet color and lifting it away removes a layer and can reveal what lies beneath. The pointed tip works as a drawing tool too. Scratching a line through wet paint to expose the layer below is called sgraffito, and it is a quick way to suggest branches, grass or fine highlights. A stiffer blade holds a sharper line for this, while a very flexible blade tends to wander.
These techniques depend on a clean edge and a smooth, undamaged blade. A nick or bent tip will snag and leave unwanted lines, so inspect the knife before a session. A little wiping between strokes keeps lifted paint from smearing back across your work.
Layering, Drying Time and Fat Over Lean
Thick oil paint takes a long time to dry all the way through, often weeks or longer for heavy ridges, even though the surface may feel dry sooner. This affects how you plan a knife painting. If you build thick layers too quickly, the top skin can dry while the paint beneath stays soft, and that mismatch can lead to wrinkling or cracking.
The traditional safeguard is the rule known as fat over lean. Lean paint has little oil and dries faster, while fat paint has more oil and dries slower. Underlayers should be leaner than the layers above them. In practice, that means thinning early layers with a bit of solvent or using paint straight from the tube with little added oil, then adding medium or applying thicker paint in later stages.
- Work from thinner underlayers toward thicker top layers.
- Avoid adding a lot of oil-rich medium early and then covering it with leaner paint.
- Allow thick passages ample time to cure before moving or varnishing, and check the paint maker’s guidance.
- Store wet paintings flat or upright in a dust-free place where the ridges will not be touched.
Patience is part of the craft. Knife painters often work wet into wet in a single session to avoid the problem, which is another reason a clean, easy-to-wipe blade is worth having.
Frequently Asked Questions
What surface is best for painting with a palette knife?
A rigid, well-primed support such as a hardboard panel or canvas mounted on board is the most forgiving, since the knife applies more pressure than a brush. Smoother grounds give clean shapes, and toothier ones give broken, textured edges. Avoid unprimed, absorbent surfaces.
How do I mix oil colors without making them muddy?
Wipe the blade between colors, use as few pigments as possible, and stop as soon as the mixture looks even. Overmixing dulls color. Mix enough for the whole passage so you do not have to match it again later.
What does fat over lean mean in oil painting?
It means each layer should contain more oil than the one under it. Lean, fast-drying paint goes first and richer, slower-drying paint goes on top. Following it helps prevent cracking and wrinkling, which matters more when a knife builds thick layers.
Can I use a palette knife to remove paint from the canvas?
Yes. While the paint is wet, a clean blade can scrape it back or lift it off, and a gently pressed blade can pull away a thin layer. Wipe the blade after every pass so you do not drag the removed paint across other areas.
The Short Version
For shape choice, the RGM. For tradition, the Richeson. For a fine finish, the Holbein. For a British classic, the Daler-Rowney Georgian. For a studio brand, the Winsor and Newton. For beginners, the Loew-Cornell. Start with a trowel shape and add others as you learn.
Oil painters often keep two knives at the easel: a longer straight blade for mixing and a smaller cranked one for applying paint. Confirm the blade shape, length and handle finish on the current listing, since art brands sell many variations under similar names. Clean the blade with a rag between colors so your mixes stay pure, and give the steel a final wipe at the end of each session.


