A loose chef’s knife in a drawer dulls quickly, chips against other tools and cuts the hand that reaches in blindly. A sheath, also called an edge guard or blade guard, protects both the edge and the person using the drawer.
The six guards below are made by knife makers and kitchen brands and are meant for drawer storage, cooking classes and travel. Because kitchen knives vary widely in length and width, sizing is the main thing to confirm before you order. We have not used these products ourselves, so confirm the details on the current listing before you buy.
As an Amazon Associate we earn from qualifying purchases. Links below are affiliate links, and they do not change the product information we give.
What to Look For
| Feature | Why it matters |
|---|---|
| Length | Pick a guard at least as long as the blade, with a little room to spare |
| Width | Wide blades such as cleavers or santokus need a roomy guard |
| Material | Plastic is light and washable; felt-lined options are gentler on the edge |
| Closure | A snug fit or a clip keeps the guard from sliding off in a bag |
In this guide
Specs at a Glance
| Guard | Material | Typical use | Notes |
|---|---|---|---|
| Kuhn Rikon Colori Knife Edge Guards | Plastic with lining | Drawer and travel | Sold in several sizes |
| Messermeister Edge-Guards | Plastic with felt lining | Drawer storage | Several lengths |
| Wusthof Knife Edge Guard | Plastic | Drawer and travel | Sized to Wusthof blades |
| Dalstrong Knife Guard | Plastic | Drawer and gift packs | Sold per knife size |
| Mercer Culinary Edge Guard | Plastic | Student and professional kits | Several sizes |
| Utopia Kitchen Knife Edge Guards | Plastic | Drawer storage | Sold as a set of guards |
The 6 Best Knife Sheaths for Kitchen Knives
Top pickBest for cooks who own a range of knives
1. Kuhn Rikon Colori Knife Edge Guards
Brightly colored guards from the Swiss kitchen brand, sold in sizes to match different blade lengths. They slide over the blade and are easy to spot in a drawer or a picnic basket.
Suits: cooks who own a range of knives. Strengths: size choices and easy identification. Weaknesses: you must match the size carefully. Skip it if you want a leather or wood look.
View Kuhn Rikon Colori Guards on Amazon
Best for owners of premium knives
2. Messermeister Edge-Guards
A guard from Messermeister, a long-established German maker of cutlery. The felt-lined interior is designed to protect the edge when the knife is slid in and out.
Suits: owners of premium knives. Strengths: a lined interior and a trusted brand. Weaknesses: sizes must be chosen with care. Skip it if you want a magnetic or hanging option.
Best for wusthof owners
3. Wusthof Knife Edge Guard
A protective cover from the German maker that is sized to fit its own chef’s and paring knives. It is a sensible match when you already own the brand.
Suits: Wusthof owners. Strengths: designed for the brand’s blade shapes. Weaknesses: fit on other brands may vary. Skip it if you own a mixed set.
View Wusthof Edge Guard on Amazon
Best for dalstrong owners and gift buyers
4. Dalstrong Knife Guard
A guard sold by Dalstrong, a brand that offers many knives and often sells guards with them or separately. Sizes line up with its own blade lengths.
Suits: Dalstrong owners and gift buyers. Strengths: matching sizes and a tidy look. Weaknesses: best fit is limited to certain blade lengths. Skip it if you want a universal fit.
View Dalstrong Knife Guard on Amazon
Best for knife rolls and student kits
5. Mercer Culinary Edge Guard
A protective guard from Mercer Culinary, a maker known for knife kits used by culinary students. It is a straightforward, functional cover for a chef’s knife.
Suits: knife rolls and student kits. Strengths: practical design and a familiar brand. Weaknesses: basic styling. Skip it if you want a premium material.
View Mercer Edge Guard on Amazon
Best for full knife sets
6. Utopia Kitchen Knife Edge Guards
A set of plastic guards in graduated sizes for a block or a drawer of mixed knives. A set makes sense when you want one cover for every blade.
Suits: full knife sets. Strengths: multiple sizes in one pack. Weaknesses: fit varies from knife to knife. Skip it if you own premium thin blades.
View Utopia Kitchen Edge Guards on Amazon
Care and Setup
- Make sure the blade is dry before it goes into a guard.
- Wash plastic guards by hand with mild soap.
- Slide the knife in with the edge facing the open side.
- Replace a guard whose lining has worn through.
Mistakes to Avoid
- Sliding a wet knife into a guard and trapping moisture.
- Buying a guard shorter than the blade.
- Forcing a wide blade into a narrow guard.
- Leaving guards to bake in a hot car.
Why an Edge Guard Is Worth Using
A kitchen knife spends most of its life not cutting. It sits in a drawer, a bag or a block, and in those places the edge can be knocked, scratched or dulled by other utensils. A sheath or edge guard covers the blade so that the edge does not contact anything, and it also covers the point and edge so that hands reaching into a drawer or a toolbox are protected. For people who carry knives to a cooking class, a catering job or a friend’s house, a guard turns a hazard into a carryable tool.
Guards also help with storage in small kitchens. If you keep knives in a drawer rather than a block, a guard for each knife prevents a jumble of edges. Storage in a block protects the edge too, but a block is bulky and not portable.
It helps to be clear about what a guard does and does not do. It protects the edge from knocks and protects people from the edge. It does not replace sharpening or honing, and it will not repair a damaged blade. Think of it as inexpensive insurance for a tool that matters to you.
Sizing and Fit for Different Blade Shapes
Fit is the most important quality of a guard. A guard that is too short leaves the tip exposed, and one that is too narrow can fail to fit over a wide blade. Measure your knife from the tip to the base of the handle and across its widest point, then compare those numbers with the listing’s stated dimensions. If a listing gives a size range, choose the one that covers your blade fully with a little room.
Blade shape matters. A chef’s knife has a deep belly and a wide heel, so it needs a guard that is wide enough. A slim boning or fillet knife needs a narrow guard that holds it snugly. A bread knife has a serrated edge and may need a guard with enough internal clearance. Santoku and Japanese-style knives have different profiles, so check their depth carefully.
Handle thickness can also interfere with how a guard fits, especially if it has an end cap. Check that the guard does not press hard on the handle. A guard that is slightly loose may slip off, and one that is too tight can scrape the edge as you insert the knife. A good fit slides on smoothly and stays in place.
Material Choices and Edge Safety
Guards are made from various materials, and each has strengths. Rigid plastic holds its shape and protects against impact, but a hard interior can scratch if grit gets inside. Softer lined guards or those with felt or fleece interiors are gentler on the edge. Rubber or flexible plastics can grip the blade but may trap moisture. Wood or leather sheaths are attractive and protective, but they need drying and some care.
Consider cleaning. Kitchen knives touch food, so the inside of a guard should be easy to rinse and dry. Look for designs without crevices that trap debris. Some guards can be washed in a dishwasher, but check the maker’s instructions. Never put a damp knife into a guard and leave it, because moisture can cause rust and mildew.
Think about retention. A guard should stay on when it is jostled, yet not need force to remove. Some use a friction fit, some use a clip or strap, and some have a locking tab. Whatever the style, always insert and remove the knife with the edge facing away from your fingers and the guard held firmly. Safe handling is more important than any feature.
Storage, Travel and Organizing Knives
A guard allows several storage options. In a drawer, each knife in its own guard avoids edge contact and makes it safer to reach in. A knife roll with guards protects blades during transport and keeps the roll from becoming a hazard. Label guards if you own many similar knives so you can find the right one quickly.
For travel, consider how you will carry. A knife in a guard inside a rigid case offers the best protection. Be aware of the rules on carrying knives, because regulations vary by place, and some transport methods do not allow knives in carry-on luggage. Check the rules before you travel.
Think about the home setting too. If you have children, keep knives, guards and all, out of reach. A guard is not a safety lock, and a child can remove it easily. A drawer with a child lock or a high cabinet is more appropriate. Keep sharpening tools separate from knives so that blades are not stored near abrasives. A tidy system saves time and protects both knives and hands.
Care, Lifespan and When to Replace a Guard
Looking after a guard is simple. Rinse it with warm water and mild soap, let it dry completely and check for grit inside. Shake out any particles, since a trapped crumb or metal shaving can scratch the edge. If the guard is lined, make sure the lining stays clean and dry. Do not store a wet knife inside.
Inspect guards occasionally. A guard that has cracked, split or lost its shape no longer protects the blade properly. A worn lining can expose the edge to a hard shell, and a warped guard can be hard to fit. If the edge of the blade shows new nicks or scratches after being stored in the guard, the guard may be at fault, and you should check its interior.
Replace a guard when it no longer fits snugly, when the plastic is brittle or when the tip has worn through. When you buy a new knife, choose a guard for it at the same time, using accurate measurements. Many guards are inexpensive relative to the knives they protect, so replacing them promptly is a practical habit. A well-fitted guard will help your knives keep their edge for longer between sharpenings.
Knife Sheath FAQ
How do I measure a knife for a guard?
Measure the blade from tip to heel, then add a little extra for the guard to sit securely.
Can a guard fit more than one knife?
Sometimes, if the blade length and width are similar, but the fit may be loose.
Do guards protect the edge?
They prevent contact with other tools. Slide the knife in carefully so you do not nick the edge.
Is a guard a substitute for a knife block?
No. A guard covers one blade, while a block or magnetic strip holds several.
Can I leave a knife in its guard for long periods?
Yes, if the knife is clean and completely dry. Moisture trapped in a guard can cause rust, so avoid storing a damp blade.
Do edge guards fit serrated knives?
Many do, but check the listing for blade width and clearance. Serrated blades should slide in without catching the teeth.
How do I put a guard on safely?
Hold the guard steady, with the open end facing you, and slide the knife in with the edge facing away from your hand. Remove it the same way, keeping fingers clear.
Will a guard blunt my knife?
A well-fitted guard should not, but a hard or gritty interior can scratch the edge if the knife slides against it. Keep the inside clean.
Should I buy guards in a set or one at a time?
A set is convenient if the sizes match your knives. Measure each knife first, because a set that does not cover your blade shapes is not useful.
Can I use a guard for knives with unusual shapes?
Some shapes may not fit standard guards. Check the dimensions, and consider a roll or a custom option for very wide, curved or long blades.
The Short Version
For color-coded sizes, the Kuhn Rikon Colori. For a lined guard, the Messermeister. For German knives, the Wusthof. For gifts, the Dalstrong. For kits, the Mercer Culinary. For a multi-size set, the Utopia Kitchen.
Related Guides
- 6 Best Folding Knife Sheaths: Leather and Nylon (2026)
- 6 Best Knife Sharpeners for Kitchen Knives (Electric, Manual)
- 6 Best Manual Knife Sharpeners for Japanese Knives
- 6 Best Manual Knife Sharpeners for Kitchen Knives
- 6 Best Electric Knife Sharpeners for German Knives (2026)
Edge Guards Compared With Other Ways to Protect Blades
A snap-on or slip-on guard is only one of several ways to keep kitchen knives from dulling and from cutting you. Knowing the alternatives helps you decide whether guards are the right fix for your drawer or whether a different approach would suit your kitchen better.
- Knife blocks. A block keeps blades upright and separated, and it lives on the counter where it takes up space. It does nothing for knives you carry to a cookout or a rental kitchen, and slots can drag on an edge if you slide the knife in carelessly.
- Magnetic strips. A wall strip is fast to use and frees drawer room, but it demands a stable mounting surface and a habit of placing the blade flat rather than edge-first. Knives hang exposed, which matters in homes with small children.
- In-drawer trays. Dividers hold each knife in its own channel. They work well in a dedicated drawer, yet they do not travel, and the tray must match the knife lengths you own.
- Traditional wooden sayas. These are fitted sheaths, usually for a single Japanese-style blade. They look good and fit closely, but they are specific to one knife and cost more than a generic guard.
- Edge guards. A guard covers just the cutting edge, goes with the knife wherever it goes, and is inexpensive to replace. The trade-off is that you have to put it on and take it off every time.
Plenty of cooks combine methods: a block or strip for the three or four knives used daily, and guards for the rest, for anything stored loose in a drawer, and for any knife that travels. That approach keeps the daily workflow quick while still covering the knives most at risk.
Matching Guards to the Knives You Actually Own
Most home kitchens hold a handful of recurring blade types, and each one behaves a little differently inside a guard. Thinking through your own set before ordering prevents the most common returns.
Chef’s knives and santoku
These are the broadest blades in most drawers, so the heel is where a tight guard binds. Check the widest point of the blade, not only the overall length. A santoku has a flatter edge and a sheepsfoot-style tip, and it often needs a guard with a squarer end than a pointed chef’s knife does.
Paring and utility knives
Small knives are the ones that get tossed loose into a drawer, which makes them the most worthwhile to cover. Short guards are easy to find, but they also slip off more readily on a slick handle, so look for a snug fit or a design that grips the spine.
Bread and serrated knives
Long, slim serrated blades need a guard that is both long enough and shallow enough to avoid catching teeth on the inner wall. A guard with a rigid back and a smooth interior makes insertion easier and reduces the chance of chipping the points of the serrations.
Slicers, carving knives and cleavers
Very long slicers may need a guard designed for 10 or 12 inches, and a cleaver needs something much wider than a standard edge guard. If a product lists a maximum blade width, treat it as a hard limit rather than a suggestion.
Write down the length and widest point of each knife before you shop. A simple list takes five minutes and lets you compare dimensions on a product page without guessing.
Safe Handling When Knives Stay Guarded
A guard reduces risk, but it does not remove it. A few handling habits keep fingers safe at the moments when accidents actually happen.
- Slide with the spine, away from the edge. When removing a guard, hold the handle firmly, keep your free hand clear of the path, and pull the guard off in the direction that moves the edge away from your fingers. Never pull the guard toward your body.
- Put the guard down before you reach for the knife. Do not carry a bare knife to the guard in your other hand while distracted. Bring the guard to the knife on a stable surface.
- Do not trust a guard as a full barrier. Thin plastic can be pierced by a point if a knife falls tip-down. Treat a guarded knife as still sharp.
- Keep guarded knives out of reach of children. A covered edge looks harmless. Store them in a high drawer or a latched cabinet.
- Never reach into a drawer blindly. If knives share a drawer with utensils, open it fully and look before grabbing. Guards help here, though a dedicated slot is better.
It also helps to check that a guard sits fully seated before you close a drawer. A half-on guard can slide off when the drawer jolts, leaving an exposed edge among the spatulas.
Planning a Budget for a Full Set of Guards
Because guards are inexpensive per piece, it is easy to buy too many or the wrong sizes. A short plan keeps spending sensible.
Start with the knives that cost the most to replace or sharpen, and the ones most likely to hit other metal in a drawer. In many kitchens that means the chef’s knife, the slicer, and any specialty blade. Cover the paring and utility knives next, since they are small enough to get lost under other tools.
Multi-packs that include several lengths are usually the best value when your set has varied sizes, since individual guards for each length would add up. If you own just one or two good knives, buying matched single guards is simpler and avoids paying for sizes you will never use. Whatever you choose, avoid mixing brands in a single order unless you have measured both, because internal widths differ from maker to maker.
Finally, think about replacement. Plastic guards crack after years of use and a replaced guard costs far less than a re-sharpened edge. Setting aside a small amount for replacements every few years is a better strategy than overspending on a premium set you do not need.
Frequently Asked Questions
Can I put knives in the dishwasher while they are in edge guards?
No. Dishwasher heat, detergent, and jostling can warp plastic and damage both the guard and the blade. Wash knives by hand, dry them completely, and then slide on the guard. Many guards can be hand washed, but check the maker instructions before using hot water.
Should I put a guard on a knife that is still damp?
It is better to dry first. Moisture trapped inside a guard sits against the steel and can encourage spotting or rust, especially on carbon steel blades. Wipe the knife fully dry, including the spine, then slip it into the guard.
Do edge guards work on thick Japanese-style knives?
Sometimes. Japanese knives often have a thicker spine, a taller heel, or a different tip shape than Western chef knives. Check the stated blade thickness and height range on the product page and measure your own knife before you order.
What is the best way to store guarded knives in a drawer?
Lay them flat in a drawer with a shallow organizer or a divided tray so they cannot roll or shift against each other. Keep handles pointing the same direction, and avoid piling other metal tools on top of them.



